Cisco FM3500 Endo, Руководство по установке и настройке

Страница: 152 / 178

Software Plug-Ins
© 2021 Cisco and/or its affiliates. All rights reserved. Page 152 of 177
5. Complete the plug-in activation process as shown in
“Plug-in
activation” (page 146)
.
8.2.4. Exporting and uploading multiple Activation codes
If more than one plug-in Activation code must be uploaded to a Fluidmesh
radio transceiver unit at the same time, the need to upload codes one by
one can be avoided by exporting multiple codes, or all codes, from the
Partner Portal as a *.CSV file.
To export a collection of Activation codes from the Partner Portal as a
*.CSV file, do the following steps:
1. Log on to the Fluidmesh Partner Portal .
2. Click the Plug-ins link.
• The Plug-ins web page will be shown.
3. Convert all needed License codes and/or Deactivation codes to
Activation codes as shown in
“Plug-in activation” (page 146)
4. To export only selected Activation codes, check the selection
check-boxes to the left of each plug-in that must be included in
the *.CSV file, then click the
Export selected button.
Alternatively, export all Activation codes by clicking the Export
All button ( Figure 72 (page 152) ).
Figure 72. Plug-ins web page (code export controls)
5. Follow the software prompts to download the exported *.CSV file
to your computer. Save the file in a safe place.
6. On the configurator interface, click the -manage plug-ins link
under MANAGEMENT SETTINGS in the left-hand settings menu.
• The
MANAGE PLUG-INS dialog will be shown.
IMPORTANT
If all Activation codes are exported, only the
Activation codes that are linked to the unit
identification number (
5.a.b.c ), or the unit serial
number of the target unit, will be assigned to the unit.
All codes that are not relevant to the unit will remain
unused.