device, system and software, that is gathered periodically to provide and
improve Fluidmesh’s products and services, facilitate the provision of
software updates, product support and other services to you (if any)
related to Fluidmesh products, and to verify compliance with the terms of
this license. Fluidmesh may use this information, as long as it is collected
in a form that does not personally identify you, for the purposes described
above.
To enable Fluidmesh’s partners and third-party developers to improve
their software, hardware and services designed for use with Fluidmesh
products, Fluidmesh may also provide any such partner or third-party
developer with a subset of diagnostic information that is relevant to that
partner’s or developer’s software, hardware and/or services, as long as
the diagnostic information is in a form that does not personally identify
you.
7.10. Warranty disclaimer
Fluidmesh Firmware, including without limitation any open source
software, any Fluidmesh Device, and any accompanying documentation
are provided 'As is', and Fluidmesh and its suppliers make, and you
receive, no warranties or conditions, whether express, implied, statutory
or otherwise, or in any communication with you, and Fluidmesh and its
suppliers specifically disclaim any implied warranty of merchantability,
satisfactory quality, fitness for a particular purpose, or non-infringement
and their equivalents.
Fluidmesh does not warrant that the operation of the Fluidmesh Firmware
will be uninterrupted or error-free or that the Fluidmesh Firmware will meet
your specific requirements. You acknowledge that Fluidmesh has no
support or maintenance obligations for the Fluidmesh Firmware.
7.11. Limitation of liability
Except to the extent that liability may not by law be limited or excluded, in
no event will Fluidmesh or its suppliers be liable for loss of, or corruption
to data, lost profits or loss of contracts, cost of procurement of substitute
products or other special, incidental, punitive, consequential or indirect
damages arising from the supply or use of the Fluidmesh Firmware,
howsoever caused and on any theory of liability (including without
limitation negligence).
This limitation will apply even if Fluidmesh or an authorized distributor or
authorized reseller has been advised of the possibility of such damages,
and notwithstanding the failure of essential purpose of any limited remedy.
In no event shall Fluidmesh's or its suppliers' or its resellers’ liability
exceed five hundred United States dollars (US$ 500). You acknowledge
that this provision reflects a reasonable allocation of risk.
Fluidmesh end-user license agreement
© 2021 Cisco and/or its affiliates. All rights reserved.
Page 20 of 23
