A-20
Cisco Firepower Management Center 750, 1500, 2000, 3500, and 4000 Hardware Installation Guide
Appendix A Memory Upgrade Instructions for Firepower Management Centers
Installing the Chassis Cover
Installing the Cover on Firepower Management Center 1500 and 3500
To install the cover on a Firepower MC1500 or MC3500:
Note
A nonskid surface or a stop behind the MC1500 or MC3500 may be needed to prevent the device from
sliding on your work surface.
Step 1
Place the cover over the device as shown in
so that the side edges of the cover sit just inside
the chassis sidewalls.
Step 2
Slide the cover forward to engage the recessed edge of the cover with the front of the chassis (see “2” in
). Make sure the cover latch clicks into place.
Step 3
Insert the security screw at the center of the top cover (see “3” in
).
Figure A-20
Installing the Cover on a MC1500 and MC3500
1
Top cover
3
Security screw
2
Recessed edge
—
—