Cisco Firepower 4100 Series Скачать руководство пользователя страница 315

Страница: 315 / 420

show package

To display downloaded package information, use the

show package

command.

show package

[

detail

expand

type endpoint_type

name

]

Syntax Description

(Optional) Displays detailed package information, including version number
and time and date stamps.

detail

(Optional) Lists the images bundled in each package. The

detail

keyword is

also available.

expand

(Optional) Displays information for the specified package end-point type:

•

b-series-bundle

—Lists information for any available B Series Bundles.

•

c-series-bundle

—Lists information for any available C Series Bundles.

•

catalog

—Lists information for the FXOS image catalog which is a list

of images and packages.

•

firmware-fpr4k-bundle

—Lists information for any available

FP4100-series firmware bundles.

•

firmware-fpr9k-bundle

—Lists information for any available FP9300

firmware bundles.

•

image

—Lists available firmware images.

•

full-bundle

—Lists information for any downloaded full bundles.

•

infrastructure-bundle

—Lists information for any downloaded

infrastructure bundles.

•

platform-bundle

—Lists information for any downloaded platform

bundles.

•

unknown

—Lists information for any downloaded bundles of unknown

type.

The

detail

and

expand

keywords are also available with this option.

type endpoint_type

(Optional) Displays information for the specified package.

The

detail

expand

and

type

keywords are also available with this option.

name

Command Modes

Firmware mode

Command History

Modification

Release

Command added.

1.1(1)

Cisco Firepower 4100/9300 FXOS Command Reference

313

S Commands

show package

Содержание Firepower 4100 Series





































































































































































































































































































































































































































Результаты поиска

Содержание Firepower 4100 Series

Отзывы:

Бренды по названию

Популярные бренды

Cisco Firepower 4100 Series, Справочник по командам

Результаты поиска

Содержание Firepower 4100 Series

Отзывы:

Бренды по названию

Популярные бренды