Cisco Firepower 1120, Установка оборудования

Страница: 42 / 98

42
Wall-Mount Height
The router should be mounted at a height at which you are able to view the top of the module-side panel and at which
the cables are able to be managed without adding stress to the router ports.
Wall-Mount Hardware Distance
The hardware you provide should be mounted the correct distance apart so that the router wall mount holes (Item 1,
Figure 6 on page 42 ) can be hung on the hardware 7.30 in. (185.4 mm) .
Figure 6 Distance for Wall-Mounting Hardware
Ground the Router
You must ground the router with the grounding lug on the chassis exterior as described in this section.
Warning: This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an
electrician if you are uncertain that suitable grounding is available.
Statement 1024
302217
7.30 inches
(185.4 mm)
Some bracket details not shown for clarity.
1