background image

21

FCC Compliance

United States FCC Compliance

This device has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
such interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy. If not 
installed and used in accordance with the instructions, it may 
cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by 
turning the equipment OFF and ON, the user is encouraged to 
try to correct the interference by one or more of the following 
measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and 
 receiver.

•  Connect the equipment into an outlet on a circuit different
  from that to which the receiver is connected.

•  Consult the service provider or an experienced radio/television 
  technician for help.

Any changes or modifications not expressly approved by
Cisco Systems, Inc., could void the user’s authority to operate 
the equipment.

The information shown in the FCC Declaration of Conformity 
paragraph below is a requirement of the FCC and is intended to 
supply you with information regarding the FCC approval of this 
device. 

The phone numbers listed are for FCC-related questions 

only and not intended for questions regarding the connection or 
operation for this device. Please contact your service provider for 
any questions you may have regarding the operation or installation 
of this device.

 Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is 
subject to the following two conditions: 1) the device may not 
cause harmful interference, and 2) the device must accept any 
interference received, including interference that may cause 
undesired operation.

Explorer 1640HDC and 1642HDC Digital-Only High-De

¿

 nition 

Interactive Set-Tops

Models: 1640HDC and 1642HDC

Manufactured by: Cisco Systems, Inc. 

5030 Sugarloaf Parkway 

Lawrenceville, Georgia 30044 USA

Telephone: 

770 236-1077

Canada EMI Regulation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la class B est conforme à la norme 
NMB-003 du Canada.

20081121 FCC Standard

Software and Firmware Use

The software described in this document is protected by copyright 
law and furnished to you under a license agreement. You may 
only use or copy this software in accordance with the terms of 
your license agreement.

The 

¿

 rmware in this equipment is protected by copyright law. You 

may only use the 

¿

 rmware in the equipment in which it is provided. 

Any reproduction or distribution of this 

¿

 rmware, or any portion of 

it, without our express written consent is prohibited.

Disclaimer

Cisco Systems, Inc. assumes no responsibility for errors or omissions 
that may appear in this guide. We reserve the right to change 
this guide at any time without notice.

AVC VIDEO LICENSE

With respect to each AVC/H.264 product, we are obligated to 
provide the following notice:

THIS PRODUCT IS LICENSED UNDER THE AVC PATENT 
PORTFOLIO LICENSE FOR THE PERSONAL USE OF A 
CONSUMER OR OTHER USES IN WHICH IT DOES NOT 
RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN 
COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) 
AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY 
A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/
OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED 
TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR 
SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL 
INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. 
SEE 

HTTP://WWW.MPEGLA.COM

 

Accordingly, please be advised that service providers, content 
providers, and broadcasters are required to obtain a separate use 
license from MPEG LA prior to any use of AVC/H.264 encoders 
and/or decoders.

Содержание Explorer 1640HDC





























Отзывы: