Cisco DX650, Руководство администратора

Страница: 215 / 230

The End User Configuration window appears.
Step 2 In the User Information pane of this window, enter the following:
• User ID - Enter the end user identification name. Cisco Unified Communications Manager does not
permit modifying the user ID after it is created. You may use the following special characters: =, +, <,
>, #, ;, \,
“ “
, and blank spaces. Example: johndoe
• Password and Confirm Password - Enter five or more alphanumeric or special characters for the end
user password. You may use the following special characters: =, +, <, >, #, ;, \,
“ “ , and blank spaces.
• Last Name - Enter the end user last name. You may use the following special characters: =, +, <, >, #, ;,
\,
“ “ , and blank spaces.. Example: doe
• Telephone Number - Enter the primary directory number for the end user. End users can have multiple
lines on their Cisco Desktop Collaboration Experience devices. Example: 26640 (John Doe's internal
company telephone number)
Step 3
Click Save .
Step 4 Proceed to the section Identify Cisco Desktop Collaboration Experience Model, on page 197 .
Identify Cisco Desktop Collaboration Experience Model
To identify the user Cisco Desktop Collaboration Experience model and protocol, follow these steps:
Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Phone .
Step 2 Click Add New .
Step 3
Select Cisco Desktop Collaboration Experience from the Phone Type drop-down list, then click Next .
The Phone Configuration window appears.
Set Up Cisco Desktop Collaboration Experience Required Fields
In the Phone Configuration window, you can use the default values for most of the fields.
To configure the required fields and some key additional fields, follow these steps:
Procedure
Step 1
For the required fields, possible values, some of which are based on the example of user johndoe, can be
configured as follows:
a) In the Device Information pane of this window:
Cisco Desktop Collaboration Experience DX650 Administration Guide, Release 10.1(1)
197
Identify Cisco Desktop Collaboration Experience Model