Software User Guide
Cisco High-Defi nition
Digital Transport Adapter
(DTA)
HDA2.0 and HDA2.5
1
2
Welcome
With the Cisco High-Defi nition
Digital Transport Adapter (DTA),
you can watch a variety of
standard- and high-defi nition
channels, including subscribed
channels where off ered. The HD
DTA may be connected to an
HDTV or traditional TV (analog
TV). Contact your video service
provider for details on channel
subscriptions.
Switch Between Power On and Standby
When the DTA is on, switch to Standby by pressing
DTA
POWER
on the remote control. The Power light on the
DTA front panel turns red to let you know the DTA is in Standby. Switch
back to on by pressing
DTA POWER
again.
T15308
Power
DTA 170HD
3RZHUOLJKWLVUHGZKHQWKH'7$LVLQ6WDQGE\
Note
: To program the remote to control the TV, refer to the guide that
came with the remote control.
Activate and Watch TV
When fi rst connected, the DTA may require activation by your video
service provider.
Please wait for the DTA to be activated.
Please contact your service provider to restore the service.
We’re sorry for the inconvenience.
Hub ID: 3
Serial Number: clbbblspg
MAC Address: 12BF2001090F
Service Provider Phone: 123-456-7890
T15289
Power
DTA 170HD
If your TV displays the
Activation Support
message or if the Power
light blinks twice, turns off , and repeats this sequence, contact your
video service provider to activate the DTA.
To watch TV, the DTA must be connected to a TV or an HDTV that is
on. Follow the DTA and TV connection instructions to select the DTA
input or channel.
Select Channels
There are several ways to select a channel.
C/Channel -
To watch the next higher channel, press
CH
.
To watch the next lower channel, press
CH
.
LAST
To jump back to the previously watched channel, press
LAST
.
Numeric Keys
To watch a specifi c channel, press the numbers on
the remote control. The DTA will tune to the channel
within 4 seconds of the last number pressed. Or,
press
ENTER
after the last number to begin the
channel change immediately.
Channel List
1. Press
MENU
. Then press
CH
to highlight
Channels
and press
ENTER
.
Channels
Captions
Language
HDMI
Screen Format
Parental Controls
Press ENTER to select, MENU to exit.
T15290
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
3
4
5
6
7
2. Navigate to the desired channel and press
ENTER
to watch the
selected channel.
Note
: To navigate to the desired channel, press
CH
,
CH
to
move up or down the list. Or, to move up or down the list one page
at a time, press
PAGE+
or
PAGE-
.
Press ENTER to select, MENU to exit.
Channel List
410 HDNet
411 NETmv
412 ESPHD
425 CinHD
550 SHOW
551 SHO2W
552 SHO3W
553 TMCW
T15291
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
Adjust the Volume
You can use the remote control to adjust the volume
of the DTA (factory setting), or you can program
the remote control to adjust the volume of the TV
(custom setting). With either setting, use these keys
to adjust volume.
Control DTA Volume (Factory Setting)
When shipped from the factory, the remote control is set to control
DTA volume. Controlling DTA volume allows you to adjust the volume
within the range selected on the TV.
Control TV Volume (Custom Setting)
To control TV volume with the remote control, we recommend you set
the DTA volume to the maximum level and then program the remote
control to adjust TV volume by following instructions in the remote
control guide.
Turn On Closed Captions
When the DTA leaves the factory, closed captions are turned off . Follow
these steps to turn on closed captions:
1. Press
MENU
. Then press
CH
to highlight
Captions
and press
ENTER
.
Channels
Captions
Language
HDMI
Screen Format
Parental Controls
Press ENTER to select, MENU to exit.
T15292
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
2. Press
CH
to highlight
On
, and then press
ENTER
to turn on
captions. From this menu, you can also change the captions service
and advanced settings, such as font color and size.
Press ENTER to select, MENU to exit.
Captions
On
Off
Service
Advanced
Auto Select
Manual Select
ENHANCED:
STANDARD:
Off
Off
T15293
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
Change the Audio Language
When the DTA leaves the factory, the audio language is set to English.
Follow these steps to change audio to another available language:
1. Press
MENU
. Then press
CH
two times to highlight
Language
,
and press
ENTER
.
T15294
Channels
Captions
Language
HDMI
Screen Format
Parental Controls
Press ENTER to select, MENU to exit.
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
2. Press
twice to move to
Audio
and then
English
.
T15295
Press ENTER to select, MENU to exit.
Channels
Captions
Language
HDMI
Screen Format
Parental Controls
Audio
Menus
English
Español
Français
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
3. Press
CH
until the desired language is highlighted, and press
ENTER
to select the language.
Note
: Some programs may not off er an alternate audio language.
When an alternate audio is not available, the audio may be English,
or the program’s original language.
4. Press
EXIT
to close the menu.
Change the Menu Language
When the DTA leaves the factory, the menu language is set to English.
Follow these steps to change to another available menu language:
1. Press
MENU
. Then press
CH
two times to highlight
Language
,
and press
ENTER
.
2. Use the
and
CH
keys to move to
Menus
and then
English
.
T15296
Press ENTER to select, MENU to exit.
Channels
Captions
Language
HDMI
Screen Format
Parental Controls
Audio
Menus
English
Español
Français
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
At a Glance
VOL+
MUTE
VOL-
T15310
/RZHU
9ROXPH
5DLVH
9ROXPH
0XWH
9ROXPH
Note
: If the DTA and the TV both have captions on, the captions
text may be displayed in two locations or the text may overlap. If
this occurs, turn captions off on one of the devices (DTA or TV).
3. Press
EXIT
to close the menu.
3. Press
CH
until the desired language is highlighted, and press
ENTER
to select the language.
4. Press
EXIT
to close the menu.
Turn On the DTA
The DTA turns on when
plugged in to a power
source. The Power light
turns green to let you
know the DTA is on.
Note
: Should an error occur that requires service, the Power light
blinks red. When this occurs, call your video service provider for
assistance.
POWER
DTA
POWER
TV
1
2
3
4
5
6
7
8
9
INFO
LAST
0
LAST
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
VOL+
MUTE
VOL-
PROG
T15287
'HYLFH
3RZHU
&RQWURO
1XPHULF
.H\V
1DYLJDWLRQ
.H\V
9ROXPH
&RQWURO
5HPRWH
&RQWURO
3URJUDPPLQJ
T15288
Power
DTA 170HD
3RZHUOLJKWLVJUHHQZKHQWKH'7$LVRQ
1RWH
3RZHUOLJKWPD\EOLQNZKHQ
WKHXQLWILUVWWXUQVRQ
POWER
DTA
POWER
TV
1
2
3
4
5
6
7
8
9
INFO
LAST
0
LAST
MENU
PAGE+
EXIT
PAGE-
ENTER
CH+
CH-
