Cisco DPQ3925 страница 100 Скачать руководство пользователя | Manualshive

Страница: 100 / 108

background image

100

OL-30824-01

Frequently Asked Questions

Q. How does the residential gateway connect to my computer?

A. The residential gateway connects to the PC using a wireless connection or the

10/100/1000BASE-T Ethernet port on your PC. If you want to use an Ethernet

interface, Ethernet cards available from your local PC or office supply retailer, or
from your service provider. For best performance over an Ethernet connection, your

PC should be equipped with a Gigabit Ethernet card.

Q. After my residential gateway is connected, how do I access the Internet?

A. Your local service provider becomes your Internet Service Provider (ISP). They

offer a wide range of services including e-mail, chat, news, and information services.

Your service provider will provide the software you will need.

Q. Can I watch TV and surf the Internet at the same time?

A. Absolutely! If you subscribe to cable television service, you can watch TV and
use your residential gateway at the same time by connecting your TV and your

residential gateway to the cable network using an optional cable signal splitter.

Common Troubleshooting Issues

I don't understand the front panel status indicators

See

Front Panel LED Status Indicator Functions

(on page 102), for more detailed

information on front panel LED status indicator operation and function.

The residential gateway does not register an Ethernet connection



Verify that your computer has an Ethernet card and that the Ethernet driver

software is properly installed. If you purchase and install an Ethernet card,

follow the installation instructions very carefully.



Verify the status of the front panel status indicator lights.

The residential gateway does not register an Ethernet connection after connecting to a hub

If you are connecting multiple PCs to the residential gateway, you should first

connect the modem to the uplink port of the hub using the correct crossover cable.
The LINK LED of the hub will illuminate continuously.

The residential gateway does not register a cable connection



The modem works with a standard 75-ohm RF coaxial cable. If you are using a

different cable, your residential gateway will not function properly. Contact your

cable service provider to determine whether you are using the correct cable.



Your NIC card or USB interface may be malfunctioning. Refer to the

troubleshooting information in the NIC or USB documentation.

«
...
98
99
100
101
102
...
»

Содержание DPQ3925













































































































Отзывы:

Нет отзывов

Похожие инструкции для DPQ3925

Бренд: Pace Страницы: 2

Бренд: Yacht Devices Страницы: 60

Бренд: SerVision Страницы: 40

Бренд: AudioCodes Страницы: 2

Бренд: PalmMicro Страницы: 16

SMART/RG SR905ac

Бренд: ADTRAN Страницы: 111

Бренд: Rose Point Страницы: 27

Бренд: Cal Amp Страницы: 164

Бренд: Datalogic Страницы: 16

Busch-free@home DG-M-1.16.11

Бренд: Busch-Jaeger Страницы: 35

Бренд: ZyXEL Communications Страницы: 2

Бренд: ZyXEL Communications Страницы: 2

Бренд: InHand Страницы: 78

EA_Gatekeeper 3 Series

Бренд: Elster Страницы: 10

INSOMNIAC CIA G-600

Бренд: Opentech Страницы: 13

Бренд: Nexcom Страницы: 68

Бренд: Nexcom Страницы: 102

Бренд: URC Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды