Cisco DPC3928 DOCSIS, Руководство пользователя

Страница: 55 / 68

Frequently Asked Questions
OL-29161-01 33

To get a DNS server address automatically using DHCP, click Obtain DNS
server address automatically
, and then click
OK
.

To specify a DNS server address, click Use the following DNS server
addresses
, and then, in the
Preferred DNS server
and
Alternate DNS server
boxes, type the addresses of the primary and secondary DNS servers.
9
To change advanced DNS, WINS, and IP settings, click
Advanced
.
10 When you are finished, click OK .
11 Try to access the Internet. If you cannot access the Internet, contact your service
provider for further assistance.
Configuring TCP/IP on Windows XP Systems
1 Click Start , and depending on your Start menu setup, choose one of the
following options:

If you are using the Windows XP Default Start Menu, select Connect to ,
choose Show all connections , and then go to step 2.

If you are using the Windows XP Classic Start Menu, select Settings , choose
Network Connections , click Local Area Connection , and then go to step 3.
2 Double-click the Local Area Connection icon in the LAN or High-Speed Internet
section of the Network Connections window.
3 Click Properties in the Local Area Connection Status window.
4
Click
Internet Protocol (TCP/IP)
, and then click
Properties
in the Local Area
Connection Properties window.
5 Select both Obtain an IP address automatically and Obtain DNS server address
automatically in the Internet Protocol (TCP/IP) Properties window, and then
click OK .
6 Click Yes to restart your computer when the Local Network window opens. The
computer restarts. The TCP/IP protocol is now configured on your PC, and your
Ethernet devices are ready for use.
7 Try to access the Internet. If you cannot access the Internet, contact your service
provider for further assistance.
Configuring TCP/IP on Macintosh Systems
1
Click the
Apple
icon in the upper-left corner of the Finder. Scroll down to
Control Panels , and then click TCP/IP .
2 Click Edit on the Finder at the top of the screen. Scroll down to the bottom of the
menu, and then click User Mode .
3
Click
Advanced
in the User Mode window, and then click
OK
.
4 Click the Up/Down selector arrows located to the right of the Connect Via
section of the TCP/IP window, and then click
Using DHCP Server
.
5 Click Options in the TCP/IP window, and then click Active in the TCP/IP
Options window.