manualshive.com logo in svg

Cisco DPC3212, Руководство пользователя

Поделиться
Скачать
Cisco DPC3212 Скачать руководство пользователя страница 25

Part Number 4021203 Rev A 

 

25 

 

 

How Do I Connect the Cable Modem for Internet and Telephone Service?

 

4

 

Connect your PC to the cable modem using either of the following methods. 

„

 

Ethernet Connection:

 Locate the yellow Ethernet cable, connect one end of 

the Ethernet cable to the Ethernet port on your PC, and connect the other end 
to the yellow 

ETHERNET

 port on the back of the cable modem.  

Note: 

To install more Ethernet devices than ports provided on the cable 

modem, use an external multi-port Ethernet switch(s). 

„

 

USB Connection: 

Locate the blue USB cable, connect one end of the cable to 

an available USB port on your PC, and connect the other end to the blue 

USB 

port on the back of the cable modem. 

Important:

 When using a USB connection, you need to install USB drivers on 

your PC. For assistance, go to 

Installing USB Drivers

 (on page 27).  

Note: 

You can connect two separate PCs to the cable modem at the same time by 

connecting one PC to the 

ETHERNET

 port and one PC to the 

USB

 port. 

However, do not connect your PC to both the 

ETHERNET

 and 

USB

 ports at the 

same time. 

5

 

Connect one end of a telephone jumper cable (not included) to a telephone outlet 

in your home or to a telephone or fax machine.  Then connect the other end of the 
jumper cable to the appropriate RJ-11 

TELEPHONE

 port on the back of the cable 

modem. The telephone ports are light gray and are labeled 1/2 and 2 or 1 and 2 
depending on the region of the world the cable modem is used. 

Notes:

– 

Make sure to connect your telephone service to the correct RJ-11 port.  For 
single line telephone service, connect to port 1/2 or 1. 

– 

In North America, cable modems have multi-line capability on the RJ-11 
telephone port labeled 1/2.  Line 1 is on pins 3 and 4 of port 1/2, and 
Line 2 is supported on pins 2 and 5.  In Europe, cable modems support 
only one line per port.  Line 1 is on port 1 and line 2 is on port 2. 

– 

Telephones that require electrical connectors other than RJ-11 may 
require an external adapter (sold separately). 

6

 

Locate the AC power cord provided with your cable modem. Insert one end of 

the power cord into the AC connector on the back of the cable modem.  Then, 
plug the AC power cord into an AC outlet to power-up the cable modem. The 
cable modem will perform an automatic search to locate and sign on to the 
broadband data network. This process may take up to 2-5 minutes. The modem 
will be ready for use when the 

POWER

, 

DS

, 

US

 and 

ONLINE

 LEDs on the front 

panel of the cable modem stop blinking and remain on continuously.  

Содержание DPC3212









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды