Cisco D9865, Инструкция по установке и эксплуатации

Страница: 214 / 260

7-16 D9865 Satellite Receiver Installation and Operation Guide 4035197 Rev C
NIT timeout Set nit timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning. If
the problem persists,
determine if uplink is
sending the current SI
information table. Disable
the warning if not using the
table. Network Information
Table was never
received.
nit is lost No longer receiving
Network Information
Table.
Clear nit fault cleared
CAT timeout Set cat timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning. If
the problem persists,
determine if uplink is
sending the current SI
information table. Disable
the warning if not using the
table. Conditional Access
Table was never
received.
cat is lost No longer receiving
Conditional Access
Table.
Clear cat fault cleared
ECT timeout Set ect timed out Cause: Uplink is not
sending or is sending
intermittently.
Remedy: Clear warning. If
the problem persists,
determine if uplink is
sending the current SI
information table. Disable
the warning if not using the
table. Event Control Table
was never received.
ect is lost No longer receiving
Event Control Table.
Reset ect fault cleared
Memory Usage Host Set Excessive (stack/
partition) memory
usage Cause: Possible software
issue.
Remedy: Clear warnings,
reset the unit, and notify
customer service if the
problem persists. SW exceeding
allowable memory
usage.
Clear Normal (stack/
partition) memory
usage
MPE near capacity Set Approaching current
capacity Cause: Unit is busy
processing or handling
other services.
Remedy: Reduce or stop
MPE service content. Decoder approaching
limit of safe CPU load
for MPE processing.
Warning Message
Type
Message Cause/Remedy Description