![Cisco CVA122 Скачать руководство пользователя страница 79](http://html.mh-extra.com/html/cisco/cva122/cva122_hardware-installation-manual_63465079.webp)
B-1
Cisco CVA122/CVA122E Hardware Installation Guide
OL-0799-02 (05/2001)
A P P E N D I X
B
Connector and Cable Specifications
This appendix describes the pinouts and cabling requirements for the interfaces and cables used on the
Cisco CVA122/CVA122E Cable Voice Adapter. All connectors for these interfaces are on the
rear-panel, as shown in Figure B-1.
Figure B-1
Cisco CVA122/CVA122E Cable Voice Adapter Connectors
This appendix describes the following connectors and cabling requirements:
•
Coaxial Connector and Cable Specifications
•
Ethernet Connector and Cabling
•
•
•
Refer to the following sections for more information.
Coaxial Connector and Cable Specifications
The Cisco CVA122/CVA122E Cable Voice Adapter connects to the HFC cable system with a type-F,
right-angle, PCB-mount connector manufactured by Amp (model number 531-40047). The body is die
cast out of zinc, with a tin-lead plating. The round, center contact is made of phosphor bronze, with a
tin-lead plating. The insulator is polypropylene and will accept a coaxial cable center conductor with a
diameter ranging from 0.022 inch (0.056 mm) to 0.042 inch (1.07 mm).
V1+V2
X
USB
Phone
Power
+5,-30,-56
V
Cable TV In
Ethernet
V2
35995
Ethernet
10BaseT (RJ-45)
USB port
Phone (RJ-11)
Cable F-connector
Power receptacle