Cisco CRS Series Скачать руководство пользователя страница 43

Страница: 43 / 210

•

Static config of (S,G) required on Head-end PE.

•

Only C-SSM support on PEs.

•

Support for IPv4 MVPN S,Gs on PEs. No support for IPv6 MVPN routes.

Profile 11 : Rosen-PIM/GRE with BGP C-multicast Routing

These are the characteristics of this profile:

•

PIM-trees in the core, data encapsulation is GRE, BGP C-multicast Routing.

•

Static config of (S,G) required on Head-end PE.

•

For PIM-SSM core-tree and PIM-SM core-tree with no spt-infinity, all UMH options are supported.

•

For PIM-SM core-tree with spt-infinity case, only SFS (Highest PE or Hash-of-BGP-paths) is supported.
Hash of installed-paths method is not supported.

•

Default and Data MDTs supported.

•

Customer traffic can be SM, SSM , or Bidir (separate-partitioned-mdt).

•

Inter-AS Option A supported. Options B and C not supported.

•

All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer

Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router

Profile 12 : Rosen-mLDP-P2MP with BGP C-multicast Routing

These are the characteristics of this profile:

•

Full mesh of P2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.

•

All UMH options supported.

•

Default and Data MDT supported.

•

Customer traffic can be SM, SSM , or Bidir (separate-partitioned-mdt).

•

RPL-Tail-end-Extranet supported.

•

Inter-AS Option A, B and C supported.

•

All PEs must have a unique BGP Route Distinguisher (RD) value. To configure BGP RD value, refer

Cisco IOS XR Routing Configuration Guide for the Cisco CRS Router

Profile 13 : Rosen-mLDP-MP2MP with BGP C-multicast Routing

These are the characteristics of this profile:

•

Single MP2MP mLDP core-tree as the Default-MDT, with BGP C-multicast Routing.

•

Only SFS (Highest PE or Hash-of-BGP-paths) is supported. Hash of Installed-paths method is not
supported.

•

Default and Data MDT supported.

•

Customer traffic can be SM, SSM , or Bidir (separate-partitioned-mdt).

•

RIB-Tail-end-Extranet, RPL-Tail-end-Extranet supported.

Cisco IOS XR Multicast Configuration Guide for the Cisco CRS Router, Release 5.2.x

Implementing Multicast Routing on Cisco IOS XR Software

Label Switched Multicast (LSM) Multicast Label Distribution Protocol (mLDP) based Multicast VPN (mVPN) Support

Содержание CRS Series



















































































































































































































Результаты поиска

Содержание CRS Series

Отзывы:

Cisco CRS Series, Руководство по настройке, Страница: 43 / 210

Результаты поиска

Содержание CRS Series

Отзывы: