Cisco CPS-UCS-1RU-K9, Руководство пользователя

Страница: 20 / 84

1-12
Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9
Chapter 1 Overview
Status LEDs and Buttons
Rear Panel LEDs and Buttons
Figure 1-6 shows the rear panel LEDs and buttons for the Cisco Connected Safety and Security UCS
C220.
Figure 1-6 Rear Panel LEDs and Buttons: Cisco Connected Safety and Security UCS C220
PSU1 PSU1 PSU2 PSU2 PSU1 PSU2
1
2 3 4 7 5 6
331692
1 Power supply fault LED 5 1-Gb Ethernet link speed LED
2 Power supply AC OK LED 6 1-Gb Ethernet link status LED
3
1-Gb Ethernet dedicated management link
status LED
7
Rear Identification button/LED
4
1-Gb Ethernet dedicated management link
speed LED –
Hard drive fault
•
Off—The hard drive is operating properly.
•
Amber—This hard drive has failed.
•
Amber, blinking—The device is rebuilding.
Hard drive activity
•
Off—There is no hard drive in the hard drive sled (no access, no fault).
• Green—The hard drive is ready.
•
Green, blinking—The hard drive is reading or writing data.
Table 1-4 Front Panel LEDs, Definitions of States: Cisco Connected Safety and Security UCS C220 (continued)
LED Name State