Cisco Comcast Xfinity DPC3939 Скачать руководство пользователя страница 14

Страница: 14 / 80

IMPORTANT SAFETY INSTRUCTIONS

viii

OL-29163-01



Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation

provides proper ventilation.



Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or

other objects on top of this product.



Do not block ventilation openings.

Operating Environment

This product is designed for operation indoors with a temperature range from 32° to 104° F (0° to 40°C).

Each product should have adequate spacing on all sides so that the cooling air vents on the chassis are

not blocked.

Protect from Exposure to Moisture and Foreign Objects

WARNING: Avoid electric shock and fire hazard! Do not expose this product to

dripping or splashing liquids, rain, or moisture. Objects filled with liquids, such as

vases, should not be placed on this apparatus.

WARNING: Avoid electric shock and fire hazard! Unplug this product before cleaning.

Do not use a liquid cleaner or an aerosol cleaner. Do not use a magnetic/static cleaning

device (dust remover) to clean this product.

WARNING: Avoid electric shock and fire hazard! Never push objects through the

openings in this product. Foreign objects can cause electrical shorts that can result in

electric shock or fire.

Service Warnings

WARNING: Avoid electric shock! Do not open the cover of this product. Opening or

removing the cover may expose you to dangerous voltages. If you open the cover, your

warranty will be void. This product contains no user-serviceable parts.

Check Product Safety

Upon completion of any service or repairs to this product, the service technician must perform safety

checks to determine that this product is in proper operating condition.

Protect the Product When Moving It

Always disconnect the power source when moving the apparatus or connecting or disconnecting

cables.

Содержание Comcast Xfinity DPC3939

















































































Результаты поиска

Содержание Comcast Xfinity DPC3939

Отзывы:

Похожие инструкции для Comcast Xfinity DPC3939

Бренды по названию

Популярные бренды

Cisco Comcast Xfinity DPC3939, Руководство пользователя

Результаты поиска

Содержание Comcast Xfinity DPC3939

Отзывы:

Похожие инструкции для Comcast Xfinity DPC3939

Бренды по названию

Популярные бренды