Cisco Cisco Small Business Unmanaged Switch SR2016 Скачать руководство пользователя страница 42

Страница: 42 / 96

Chapter 5

Advanced Configuration

WebView Switches

Source Port

Defines the TCP/UDP source port to which

the ACE is matched. This field is active only if 800/6-TCP or
800/17-UDP are selected in the

Select from List

drop-down

menu. The possible field range is

0–65,535

Destination Port

Defines the TCP/UDP destination

port. This field is active only if 800/6-TCP or 800/17-UDP
are selected in the

Select from List

drop-down menu. The

possible field range is

0–65,535

Source IP Address

Matches the source port IP address to

which packets are addressed to the ACE.

Wildcard Mask

•

Defines the source IP address

wildcard  mask.  Wildcard  masks  specify  which  bits
are  used  and  which  bits  are  ignored.  A  wild  card
mask  of

255.255.255.255

indicates that no bit is

important. A wildcard of

0.0.0.0

indicates that all

the bits are important. For example, if the source IP
address

149.36.184.198

and the wildcard mask is

255.36.184.00

, the first eight bits of the IP address are

ignored, while the last eight bits are used.

Dest. IP Address

Matches the destination port IP address

to which packets are addressed to the ACE.

Wildcard Mask

•

Defines the destination IP address

wildcard mask.

Match DSCP

Matches the packet DSCP value to the ACE.

Either the DSCP value or the IP Precedence value is used to
match packets to ACLs. The possible field range is

0–63

Match IP Precedence

Matches the packet IP Precedence

value to the ACE. Either the DSCP value or the IP Precedence
value is used to match packets to ACLs. The possible field
range is

0–7

The

Add to List

button adds the configured IP Based ACLs

to the IP Based ACL Table at the bottom of the screen.

ACL > MAC Based ACL

The

MAC Based ACL

screen allows a MAC based ACL to be

defined. ACEs can be added only if the ACL is not bound
to an interface.

ACL > Mac Based ACL

ACL Name

Displays the user-defined MAC based ACLs.

New ACL Name

Specifies a new user-defined MAC based

ACL name, the name cannot include spaces.

Delete ACL

Deletes the selected ACL.

Action

Indicates the ACL forwarding action. Possible field

values are:

Permit

•

Forwards packets which meet the ACL

criteria.

Deny

•

Drops packets which meet the ACL criteria.

Shutdown

•

Drops packet that meet the ACL criteria,

and disables the port to which the packet was
addressed.

Source MAC Address

Matches the source MAC address

to which packets are addressed to the ACE.

Wildcard Mask

•

Defines the source IP address

wildcard  mask.  Wildcard  masks  specify  which  bits
are  used  and  which  bits  are  ignored.  A  wild  card
mask  of

255.255.255.255

indicates that no bit is

important. A wildcard of

0.0.0.0

indicates that all

the bits are important. For example, if the source IP
address

149.36.184.198

and the wildcard mask is

255.36.184.00

, the first eight bits of the IP address are

ignored, while the last eight bits are used.

Dest. MAC Address

Matches the destination MAC

address to which packets are addressed to the ACE.

Wildcard Mask

•

Defines the destination IP address

wildcard mask.

VLAN ID

Matches the packet’s VLAN ID to the ACE. The

possible field values are

2–4094

Содержание Cisco Small Business Unmanaged Switch SR2016

































































































Результаты поиска

Содержание Cisco Small Business Unmanaged Switch SR2016

Отзывы:

Бренды по названию

Популярные бренды

Cisco Cisco Small Business Unmanaged Switch SR2016, Руководство пользователя

Результаты поиска

Содержание Cisco Small Business Unmanaged Switch SR2016

Отзывы:

Бренды по названию

Популярные бренды