All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 7
Power requirements
WS-X6708-10G-3C: 444.36W (10.58A @ 42v)
WS-X6708-10G-3CXL: 473.76w (11.28A @ 42V)
WS-X6704-10GE with DFC3BXL: 402.36W (9.58A @ 42V)
WS-X6704-10GE with DFC3B: 377.16W (8.98A @ 42V)
WS-X6704-10GE with DFC3A: 389.76W (9.28A @ 42V)
WS-X6704-10GE with CFC: 295.26W (7.03A @ 42V)
Go to
http://www.cisco.com/go/powercalculator
for easy power consumption calculation
Indicators
Status: green (operational); red (faulty); orange (module booting)
Link: green (port enabled and connected); orange (port disabled); off (port enabled and not connected)
Table 4.
Cables for 10GBASE-CX4 Optics
Product ID
Product Description
CAB-INF-28G-1=
Cisco 1 m CX4 patch cable
CAB-INF-28G-5=
Cisco 5 m CX4 patch cable
CAB-INF-28G-10=
Cisco 10 m CX4 patch cable
CAB-INF-26G-15=
Cisco 15 m CX4 patch cable
ORDERING INFORMATION
Table 5.
Product Numbers for Ordering
Product ID
Product Description
WS-X6708-10G-3C
Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3C, requires X2
WS-X6708-10G-3CXL
Cisco Catalyst 6500 8-Port 10 Gigabit Ethernet Module with DFC3CXL, requires X2
X2-10GB-SR
10GBASE-SR X2 (multimode fiber)
X2-10GB-LR
10GBASE-LR X2 (single-mode fiber)
X2-10GB-ER
10GBASE-ER X2 (single-mode fiber)
X2-10GB-LX4
10GBASE-LX4 X2 (multimode fiber)
X2-10GB-CX4
10GBASE-CX4 X2 (copper Infiniband cable)
WS-X6704-10GE
Cisco Catalyst 6500 4-Port 10 Gigabit Ethernet Module, requires XENPAK
WS-F6700-DFC3BXL
Distributed Forwarding Card-3BXL Upgrade for WS-X6704-10GE
WS-F6700-DFC3B
Distributed Forwarding Card-3B Upgrade for WS-X6704-10GE
WS-F6700-DFC3A
Distributed Forwarding Card-3A Upgrade for WS-X6704-10GE
XENPAK-10GB-SR
10GBASE-SR XENPAK (multimode fiber)
XENPAK-10GB-LR
10GBASE-LR XENPAK (single-mode fiber)
XENPAK-10GB-ER
10GBASE-ER XENPAK (single-mode fiber)
XENPAK-10GB-LX4
10GBASE-LX4 XENPAK (multimode fiber)
XENPAK-10GB-CX4
10GBASE-CX4 XENPAK (copper Infiniband cable)
CAB-INF-28G-1=
Cisco 1 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-28G-5=
Cisco 5 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-28G-10=
Cisco 10 m CX4 patch cable for XENPAK-10GB-CX4
CAB-INF-26G-15=
Cisco 15 m CX4 patch cable for XENPAK-10GB-CX4
XENPAK-10GB-ZR
10GBASE-ZR XENPAK (single-mode fiber)
DWDM-XENPAK-xx.yy
DWDM XENPAK, where xx.yy ranges from 30.33 to 60.61 (single-mode fiber)
WDM-XENPAK-REC
RX only XENPAK (single-mode fiber)
XENPAK-10GB-LW
10GBASE-LW XENPAK (single-mode fiber) (WAN PHY)
