Cisco Catalyst 9120AX Series, Руководство по началу работы

Страница: 5 / 32

5
Cisco Catalyst 9120AX Series Access Points
AP Model Numbers and Regulatory Domains
You need to verify whether the AP model you have is approved for use in your country. To verify approval and to identify
the regulatory domain that corresponds to a particular country, visit
http://www.cisco.com/go/aironet/compliance . Not
all regulatory domains have been approved. As and when they are approved, this compliance list will be updated.
Antennas and Radios
The 9120AX series access point has four internal dual-band antennas with a dedicated 2.4 GHz radio and a 5 GHz radio,
four internal single-band antennas with a dedicated 5 GHz radio, one internal single-band antenna with a dedicated
2.4 GHz IOT radio, and one dual-band antenna with a dedicated 2.4 GHz radio and a 5 GHz AUX radio.
The access point configurations are:

C9120AXI-x—Four radios, a dual band radio with 2.4 GHz (peak gain 4dBi) and 4x4 5 GHz (peak gain 5dBi), a single
band 5 GHz (peak gain 5dBi), an omni IoT radio 2.4 GHz (peak gain 3dBi) that can be used with BLE, Zigbee, Thread
and other multi-protocol 802.15.4 devices, and an auxiliary radio with 2.4 GHz (peak gain 3dBi) and 5 GHz (peak
gain 5dBi).

C9120AXI-ME-x—Four radios, a dual band radio with 2.4 GHz (peak gain 4dBi) and 4x4 5 GHz (peak gain 5dBi), a
single band 5 GHz (peak gain 5dBi), an omni IoT radio 2.4 GHz (peak gain 3dBi) that can be used with BLE, Zigbee,
Thread and other multi-protocol 802.15.4 devices, and an auxiliary radio with 2.4 GHz (peak gain 3dBi) and 5 GHz
(peak gain 5dBi).
3
Safety Instructions
Translated versions of the following safety warnings are provided in the translated safety warnings document that is
shipped with your access point. The translated warnings are also in the
Translated Safety Warnings for Cisco Catalyst
Access Points , which is available on Cisco.com.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each
warning to locate its translation in the translated safety warnings that accompanied this device.
SAVE THESE INSTRUCTIONS Statement 1071
Warning Read the installation instructions before using, installing or connecting the system to the power source.
Statement 1004
AP Type Model Number Details
Access Point for indoor
environments, with internal
antennas C9120AXI- x Dual-band, controller-based 802.11ax
C9120AXI-ME- x Dual-band, 802.11ax with a Cisco Mobility
Express software image