Cisco Catalyst 3650 Series, Справочник по командам

Страница: 753 / 1108

clear mac address-table
To delete from the MAC address table a specific dynamic address, all dynamic addresses on a particular
interface, all dynamic addresses on stack members, or all dynamic addresses on a particular VLAN, use the
clear mac address-table command in privileged EXEC mode. This command also clears the MAC address
notification global counters.
clear mac address-table
{
dynamic
[
address mac-addr
|
interface interface-id
|
vlan vlan-id
] |
move update
| notification }
Syntax Description
Deletes all dynamic MAC addresses. dynamic
(Optional) Deletes the specified dynamic MAC address. address mac-addr
(Optional) Deletes all dynamic MAC addresses on the specified physical
port or port channel. interface interface-id
(Optional) Deletes all dynamic MAC addresses for the specified VLAN.
The range is 1 to 4094. vlan vlan-id
Clears the MAC address table move-update counters. move update
Clears the notifications in the history table and reset the counters. notification
Command Default
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Modification Release
This command was introduced. Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
You can verify that the information was deleted by entering the
show mac address-table
privileged EXEC
command.
Examples This example shows how to remove a specific MAC address from the dynamic address table:
Device# clear mac address-table dynamic address 0008.0070.0007
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
727
clear mac address-table