2-10
Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
OL-12246-01
Chapter 2 Switch Installation
Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup
Figure 2-5
Onboard Administrator Interconnect Bay Summary Window
Step 6
Click the IP address hyperlink for the switch module from the Management URL column to open a new
browser window.
Step 7
On the left side of the Onboard Administrator, choose
Configuration
>
Express Setup
.
The Express Setup page appears (see
Figure 2-6
). (Close or minimize the Device Manager Help
window.)
Figure 2-6
Express Setup Page
Step 8
Go to
“Using Express Setup” section on page 2-11
to finish setting up the switch module.