Cisco Catalyst 2960 Series, Руководство по настройке

Страница: 136 / 2288

Purpose Command or Action
Specifies the Ethernet management port in the CLI. interface fastethernet0
Example:
Switch(config)# interface fastethernet0
Step 2
Disables the Ethernet management port. shutdown
Example:
Switch(config-if)# shutdown
Step 3
Enables the Ethernet management port. no shutdown
Example:
Switch(config-if)# no shutdown
Step 4
Exits interface configuration mode. exit
Example:
Switch(config-if)# exit
Step 5
Displays the link status. show interfaces fastethernet0 Step 6
Example:
Switch# show interfaces fastethernet0
To find out the link status to the PC, you can monitor the LED
for the Ethernet management port. The LED is green (on)
when the link is active, and the LED is off when the link is
down. The LED is amber when there is a POST failure.
What to Do Next
Proceed to manage or configure your switch using the Ethernet management port. Refer to the Catalyst 2960-X
Switch Network Management Configuration Guide .
Additional References
Related Documents
Document Title Related Topic
Catalyst 2960-X Switch System Management
Configuration Guide
Bootloader configuration
Catalyst 2960-X Switch System Management
Configuration Guide
Bootloader commands
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
54
Additional References