Cisco Catalyst 2960-L Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 80

Cisco Catalyst 2960-L Скачать руководство пользователя страница 20

Description

Color

Port Mode

LED

PoE is off. If the powered device is receiving power from an
AC power source, the PoE port LED is off even if the
powered device is connected to the switch port.

Off

PoE port
power

PoE

PoE is on. The port LED is green only when the switch port
is providing power.

Green

PoE is denied because providing power to the powered device
will exceed the switch power capacity.

Alternating green
amber

PoE for the port is disabled. By default, PoE is enabled.

Amber

PoE is off due to a fault.

Blinking Amber

2

Applies only to RJ-45 ports.

PoE LED

Even if the PoE mode is not selected, the LED shows PoE problems when they are detected. The PoE LED
is only on the switches that support PoE.

Description

Color

PoE mode is not selected.

Off

PoE mode is selected. Ports are functioning correctly.

Green

• PoE mode is not selected

• At least one of the 10/100 or 10/100/100 PoE ports has been denied

power

• At least one of the ports has a PoE fault

Blinking amber

Console LEDs

The console LEDs show which console port is in use.

If you connect a cable to a console port, the switch automatically uses that port for console communication.
If you connect two console cables, the USB-mini console port has priority.

Description

Color

LED

USB-mini console port is active.

Green

USB-mini console port

Port is not active.

RJ-45 console port is active.

Off

Port LEDs

RJ-45 ports and SFP-module slots have port LEDs. These LEDs, as a group or individually, provide information
about the switch and about the individual ports.

Cisco Catalyst 2960-L Series 8-Port and 16-Port Switch Hardware Installation Guide

8

Product Overview

PoE LED

«
...
18
19
20
21
22
...
»

Содержание Catalyst 2960-L

















































































Отзывы:

Нет отзывов