background image

 

41

Using the Catalyst 2924M XL DC Ethernet Switch

78-10499-01

Obtaining Technical Assistance

To submit your comments by mail, for your convenience many documents contain 
a response card behind the front cover. Otherwise, you can mail your comments 
to the following address:

Cisco Systems, Inc.
Document Resource Connection
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate and value your comments.

This document is to be used in conjunction with the document listed in the “Related Documentation” section.

Access Registrar, AccessPath, Any to Any, AtmDirector, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, 
CCSI, CD-PAC, the Cisco logo, Cisco Certified Internetwork Expert logo, CiscoLink, the Cisco Management Connection 
logo, the Cisco NetWorks logo, the Cisco Powered Network logo, Cisco Systems Capital, the Cisco Systems Capital logo, 
Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, the Cisco Technologies logo, 
ConnectWay, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, 
Internet Quotient, IP/VC, Kernel Proxy, MGX, MultiPath Data, MultiPath Voice, Natural Network Viewer, NetSonar, 
Network Registrar, the Networkers logo, Packet, PIX, Point and Click Internetworking, Policy Builder, Precept, 
ScriptShare, Secure Script, ServiceWay, Shop with Me, SlideCast, SMARTnet, SVX, The Cell, TrafficDirector, TransPath, 
ViewRunner, Virtual Loop Carrier System, Virtual Service Node, Virtual Voice Line, VisionWay, VlanDirector, Voice 
LAN, WaRP, Wavelength Router, Wavelength Router Protocol, WebViewer, Workgroup Director, and Workgroup Stack 
are trademarks; Changing the Way We Work, Live, Play, and Learn, Empowering the Internet Generation, The Internet 
Economy, and The New Internet Economy are service marks; and ASIST, BPX, Catalyst, Cisco, Cisco IOS, the Cisco IOS 
logo, Cisco Systems, the Cisco Systems logo, the Cisco Systems Cisco Press logo, Enterprise/Solver, EtherChannel, 
EtherSwitch, FastHub, FastLink, FastPAD, FastSwitch, GeoTel, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA, 
NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, TeleRouter, and VCO are registered trademarks 
of Cisco Systems, Inc. or its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this 
document are the property of their respective owners. The use of the word partner does not imply a partnership relationship 
between Cisco and any of its resellers. (9912R)

Copyright © 2000, Cisco Systems, Inc.
All rights reserved.

Содержание Catalyst 2924M XL











































Отзывы: