© 2007 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com
Page 29 of 45
!
voice service voip
allow-connections sip to sip
signaling forward rawmsg
1
!
!
archive
log config
hidekeys
!
!
controller T1 0/0/0
framing esf
linecode b8zs
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 0/0/1
framing esf
linecode b8zs
cablelength long 0db
!
!
!
!
!
interface GigabitEthernet0/0
ip address 172.20.192.103 255.255.255.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
no ip address
1
Use this command to enables tunneling of QSIG raw messages (application-qsig) only.
