2-11
Cisco BBSM Hotspot 1.0 User Guide
78-15293-01
Chapter 2 Setting Up BBSM Hotspot
Running the Setup Wizard
–
After the question asking if you want to change your IP addresses, click
No
to ignore the
connectivity issues and continue with the setup. A warning message pops up to tell you that you
must resolve the IP address issue for BBSM Hotspot to work properly. (See
Figure 2-9
.) You
are then taken to the Enter Network Device Configuration Parameters window.
(See
Figure 2-10
.)
–
Click
Cancel
to stop the setup.
Figure 2-8
Test Failure Window
Figure 2-9
You Must Resolve This Issue Dialog Box
Step 11
Click
Next
. The Enter Network Device Configuration Parameters window appears. (See
Figure 2-10
.)
