6
Step 3: 3G Status Confirmation
Power
*
Solid Green
Ethernet
*
Solid Green
A
GPS
Solid Green
A
Computer
Option A: Off
Option B: Solid Green or Flashing Green (during Data Transfer)
3G
Solid Green
3G Status Confirmation
2. After 90 minutes, look at your 3G MicroCell front panel status indicators.
•
If the 3G status indicator is
solid green
,
3G activation is complete. You may
advance to
Step 4: Final Confirmation
.
•
If the 3G status indicator is
still flashing
after 90 minutes
, refer to the steps
below for solutions to try.
*
If the Power or Ethernet status indicators are not solid green, see the Troubleshooting section on page 14 in the
AT&T 3G
MicroCell™ User Manual
for more information.
1. Make sure the
Power
and
Ethernet
status indicators are
solid green
*
. If you chose Option B, the
Computer
status
indicator will be
solid green
or
flashing green
during data transfer.
3G Status Indicator Still Flashing after 90 Minutes?
Try these steps in this order:
1. Confirm that at least
90 minutes
have passed since first powering up the 3G MicroCell.
2.
Power cycle
your 3G MicroCell. (Unplug the power adapter from the wall outlet, wait 10 seconds, then plug it back in.)
Wait 30 minutes
for 3G indicator to go
solid green
.
3. If power cycling doesn’t resolve the problem, see
Option C on page 11 in the
AT&T 3G MicroCell™ User Manual
for an
alternative cabling configuration that may provide a solution.
4. If your 3G status indicator still
fails to go solid green, see the
Troubleshooting section on page 14 in the
AT&T 3G
MicroCell™ User Manual
,
or
contact AT&T Customer Support at
1.800.768.1212
for assistance.
Wait 90 minutes.
You have completed your part. Relax and give your 3G MicroCell time to
complete system configuration and 3G service activation. Do not turn off power or disconnect.
Note:
The
GPS
and
3G
status indicators will start
flashing green within 10 minutes
.
