Cisco ASR 901S Series, Подготовка к установке

Страница: 6 / 8

• Check the required tools list to make sure the necessary tools and test equipment are available (see
Customer-Supplied Materials and Tools ).
• Perform the installation.
Unpacking the Router
Procedure
Step 1
Open the shipping container and carefully remove the contents.
When you unpack the router, do not remove the foam blocks attached to antennas and antenna
connectors. The foam protects the antennas and connectors during installation. Tip
Step 2
Return all packing material to the shipping container, and save it.
Do not discard the packaging materials used in shipping your Cisco ASR 901S Series Aggregation
Services Router. You will need the packaging materials in the future if you move or ship the router. Note
Step 3 Ensure that all items listed in Router Package Contents, on page 6 are included in the shipment. If any item
is damaged or missing, notify your authorized Cisco sales representative.
Router Package Contents
Your router kit contains the items listed in the following table:
Description Item Qty.
Cisco ASR 901S Series Aggregation Services Router
For details about the chassis models, see Components and
Options .
Router 1
• Special screw driver (part number: 51-6796-01)
• Dust cap for antenna (part number: 29-8328-01)
Accessories or Install Kit 1
Optional Items (Ordered
Separately
)
• Pole clamp bracket
• Two pole clamp gussets
• Required hardware
For details, see Pole Mount Kit .
Pole mount kit 1
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
6 OL-29732-02
Preparing to Install the Router
Unpacking the Router