Use this hardware to attach the wall mount bracket to the wall or to
the pole clamp bracket, and the router to the wall mount bracket.
Assemble the pole clamp bracket, pole clamp gusset, screw, and
washer as described in
Assembling the Pole Clamp Bracket and the
Pole Clamp Gusset, on page 31
. Use the included hardware to attach
the pole clamp bracket onto the pole, as described in
Router onto a Pole, on page 34
. Attach the wall mount bracket onto
the wall as described in
Mounting the Router onto a Wall, on page
41
.
8
M8 x 12 screw
2
8
M8 spring
washer
3
Band Straps
Use the band straps when you mount the router on a pole larger than 4.5 inches (11.4 cm) in diameter. These
straps are part of the
Pole Mount Kit, on page 25
and require the
Strap Tool Kit, on page 29
for installation.
Figure 11: Band Straps
Description
Qty.
Item
Steel straps
2
1
Strap Tool Kit
Use the tool in the Strap Tool Kit to attach the steel straps included in the
Band Straps, on page 29
. Steel
straps are required to install the mounting plate on poles larger than 4.5 inches (11.4 cm) in diameter.
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
OL-29732-01
29
Installing the Router
Band Straps
