10
Figure 6
Cisco ASR 1002 Router Ground Connector Location and eUSB Panel Door
Step 1
Use the wire stripper to strip one end of the AWG #6 wire approximately 0.75 inches (19.05 mm).
Step 2
Insert the AWG #6 wire into the wire receptacle on the grounding lug.
Step 3
Use the manufacturer’s recommended crimping tool to carefully crimp the wire receptacle around the wire; this step is
required to ensure a proper mechanical connection.
Figure 7
Attaching a Ground Lug to the Chassis Ground Connector
Step 4
Attach the grounding lug with the wire on the left to avoid having the grounding wire overlapping the power supply.
1
F0 with Cisco ASR1000-ESP5 or Cisco ASR1000-ESP10
Note
The Cisco ASR10002 Router does not support
the Cisco ASR1000-ESP20 module.
3
The eUSB panel door on the side of the Cisco ASR 1002
Router must not be opened. If there is a problem with
eUSB flash card, the chassis should be returned.
2
R0 slot with embedded ASR1000-RP1 and embedded
ASR1000-SIP10
4
Cisco ASR 1002 Router ground stud location
1
Chassis ground lug
3
Chassis ground connector location
2
Ground lug screws
4
Earth ground symbol
ASR 1002
stat
pwr
min
maj
crit
SPA-4XOC
3-POS
S
T
A
T
U
S
0
1
2
3
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
SPA-4XOC
3-POS
S
TA
TU
S
0
1
2
3
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
STAT
QE0
QE1
QE2
QE3
BOOT
CARRIE
R
LINK
PWR ST
AT
MTS
MGMT
AUX
CON
SPA-4XOC
3-POS
S
T
A
T
U
S
0
1
2
3
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
C
/A
A
/L
3
1
2
4
280283
280034
3
4
2
1
