background image

C H A P T E R

 

1-1

Cisco AS5850 Universal Gateway Hardware Installation Guide

78-10573-06 0A

1

Cisco AS5850 Product Overview

The Cisco AS5850 is a high-density, ISDN and modem WAN aggregation system that provides both 
digital and analog call termination. It is intended to be used in service provider dial point-of-presence 
(POP) or centralized enterprise dial environments. 

The gateway components include hybrid trunk and port-handling cards (both functions are handled by 
different components in the same slot), dedicated port-handling cards, dedicated trunk cards, route 
switch controllers, power entry modules, and a blower unit to cool the chassis. An optional 2400W AC 
power shelf is also available. The gateway is designed with environmental monitoring and reporting 
functions to help maintain normal system operation and resolve adverse environmental conditions prior 
to loss of operation. If conditions reach critical thresholds, the system shuts down to avoid equipment 
damage from excessive heat or electrical current. 

Downloadable software and microcode allow you to load new software images into Flash memory 
remotely, without having to physically access the universal gateway, for fast and reliable upgrades.

This chapter provides physical and functional overviews to familiarize you with your new 
Cisco AS5850. The chapter also contains physical descriptions of system hardware and major 
components and functional descriptions of component features. 

Note

Descriptions and examples of software commands appear in this document only when they are 
necessary for installing the system hardware. For software configuration information, refer to the

 

Cisco AS5850 Universal Gateway Commissioning Guidelines

 that shipped with your system, or the 

Cisco AS5850 Universal Gateway Operation, Administration, Maintenance, and Provisioning 
Guide. 

These documents are available on Cisco.com (http://www.cisco.com), by selecting:

Products and Services

 > 

Universal Gateways

 > 

Cisco AS5800 Universal Gateways

This chapter contains the following sections:

If You Already Have a Cisco AS5800, page 1-2

System Components, page 1-2

Functional Overview, page 1-4

Cisco AS5850 Chassis, page 1-9

Field-Replaceable Units, page 1-13

Split Backplane, page 1-11

Power Requirements, page 1-28

Online Insertion and Removal, page 1-29

Содержание AS5850































Отзывы: