Field Verified
Configuration Guide
PN: 1725-36047-001_G.doc
6
6.
The following table shows additional settings for the
Switch
/
General
configuration. Navigate to this page by clicking the
Switch
tab at the top of the screen and
General
in the navigation
pane.
Parameter
Setting
Criticality
Enable multicast support
Enabled
Required
7.
Click the
Apply
button to save the changes
8.
The following table shows additional settings for the
WLAN
configuration. Navigate to this page by clicking the
WLAN
tab at
the top of the page and then clicking the
Edit
button for the WLAN
you are using for the SpectraLink Wireless Telephones.
Parameter
Setting
Criticality
Radio policy
802.11b only
Recommended
Admin status
Checked
Required
Session timeout
0 (zero)
Required
Quality of service
Gold
Required
Blacklist timeout
60
Recommended
DHCP required
As required by installation
DHCP server IP address
As required by installation
VLAN
As required by installation
Layer 2 security
Static WEP
Recommended
MAC filtering
Not checked
Recommended
Layer 3 security
None
Required
Web authentication
Not checked
Required
WEP key size *
40 or 104 bits
Recommended
Key index *
As required for installation
Recommended
Encryption key *
As required for installation
Recommended
Key format *
Hex
Recommended
* These parameters are required if Static WEP is selected for Layer 2 security.
9.
Click the
Apply
button to save the changes.
10.
Click the
Save Configuration
link at the top of the browser window
to ensure the configuration is available across system restarts.
The Airespace Wireless Enterprise Platform is now ready for use with
SpectraLink Wireless Telephones. No restart of the system is required.
All parameters take effect when applied.
