S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
2-28
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 2 Ethernet Commands
link debounce
link debounce
To enable the debounce timer on an interface, use the
link debounce
command. To disable the timer, use
the
no
form of this command.
link debounce
[
time
milliseconds
]
no link debounce
Syntax Description
Command Default
None
Command Modes
Interface configuration mode
Command History
Usage Guidelines
The port debounce time is the amount of time that an interface waits to notify the supervisor of a link
going down. During this time, the interface waits to see if the link comes back up. The wait period is a
time when traffic is stopped.
Caution
When you enable the debounce timer, link up and link down detections are delayed, resulting in a loss
of traffic during the debounce period. This situation might affect the convergence of some protocols.
Examples
The following example shows how to enable the debounce timer and set the debounce time to 1000
milliseconds for an Ethernet interface:
switch#
configure terminal
switch(config)#
interface ethernet 1/1
switch(config-if)#
link debounce time 1000
The following example shows how to disable the debounce timer for an Ethernet interface:
switch(config-if)#
no link debounce
Related Commands
time
milliseconds
(Optional) Specifies the extended debounce timer; valid values are from 0 to
5000 milliseconds. A value of 0 milliseconds disables the debounce time.
Release
Modification
4.0(0)N1(1a)
This command was introduced.
Command
Description
show interface
Displays the interface configuration information.
