background image

 

  Obtaining Documentation and Submitting a Service Request

16

Cisco Aironet Six-Element Dual-Band MIMO Patch Array Antenna (AIR-ANT25137NP-R)

OL-23461-01

Obtaining Documentation and Submitting a Service 
Request

For information on obtaining documentation, submitting a service request, and 
gathering additional information, see the monthly 

What’s New in Cisco Product 

Documentation

, which also lists all new and revised Cisco technical 

documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the 

What’s New in Cisco Product Documentation 

as a Really Simple 

Syndication (RSS) feed and set content to be delivered directly to your desktop using 
a reader application. The RSS feeds are a free service and Cisco currently supports 
RSS Version 2.0.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. 
A listing of Cisco's trademarks can be found at 

www.cisco.com/go/trademarks

. Third party trademarks mentioned 

are the property of their respective owners. The use of the word partner does not imply a partnership relationship 
between Cisco and any other company. (1005R)

Содержание Aironet AIR-ANT25137NP-R

















Отзывы: