Cisco Aironet 1570 Series, Руководство по установке

Страница: 67 / 168

3-23
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 3 Mounting the Access Point
Pole Mount Kit 2
Figure 3-15 AP1572E Vertically Mounted on Vertical Pole with PMK1
Pole Mount Kit 2
The Pole Mount Kit 2 (abbreviated as PMK2) can be used to vertically mount the AP on a vertical pole,
a horizontal pole, or on an off-angle pole. Poles of diameter ranging from 2 to 16 inches are supported.
This kit can also be used to vertically mount the AP on a wall.
The PMK2 consists of these parts:
•
A wall mount bracket, for vertical mounting on walls (see Figure 3-17 )
• A pivot bracket (see Figure 3-18 )
•
Two strap brackets (see Figure 3-19 )
• Two adjustable steel band straps
The Pivot Bracket and the Strap Brackets, are used only when mounting the AP on poles.
By itself, the Wall Mount Bracket, is used for vertical mounting on the AP on walls. For more
information, see
Wall Mounting Using PMK2, page 3-40 . When mounting the AP on poles, the Wall
Mount Bracket is used along with the Pivot Bracket and the Strap Brackets.
1
Stainless steel band straps
2
M8 x 12mm hex head bolt
3 Vertical pole 4 PMK1
353264
2
2
1
4
3