9
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions
Obtaining Documentation and Submitting a Service Request
Note
Table 2
describes the RJ-45 pin signals for the power injector output connector (TO AP).
Table 2
Power Injector Output Connector (TO AP) Pinouts
Pin Number
Signal Name
1
Ethernet signal pair (10/100/1000Base-T) and 56 VDC return
2
3
Ethernet signal pair (10/100/1000Base-T) and 56 VDC (+)
6
4
Ethernet signal pair (1000Base-T) and 56 VDC (+)
5
7
Ethernet signal pair (1000Base-T) and 56 VDC return
8
Shield
Chassis ground
Note
The power injector output connector (TO AP) only supplies 56 VDC power when the Ethernet cable is
connected to the PoE-in connector.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a
service request, and gathering additional information, see
What’s New in Cisco Product Documentation
at:
http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html
.
Subscribe to
What’s New in Cisco Product Documentation
, which lists all new and revised
Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a
reader application. The RSS feeds are a free service.
7
Ethernet signal pair (1000Base-T)
8
Shield
Chassis ground
Table 1
Power Injector Input Connector (TO SWITCH) Pinouts (continued)
Pin Number
Signal Name
