Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 4 of 6
When ordering the items listed in the above charts separately from the product, order using the spare part number
by appending an equal sign “=” to the part number. For example, order AIR-PWRINJ3= if ordering the Power
Injector under a separate order line item.
802.11g Radio Modules
IEEE 802.11g compliant
Mini-PCI form factor
2.4 GHz operations
Up to 54 Mbps
Dual RP-TNC connectors for externally attached antennas (not included)
Requires IOS image version 12.2(13)JA or later
AIR-MP21G-A-K9
FCC (Americas) Configuration
AIR-MP21G-E-K9
ETSI (Europe) Configuration
AIR-MP21G-I-K9
Israel Configuration
AIR-MP21G-J-K9
TELEC (Japan) Configuration
Power Injectors
The Cisco Aironet 1200 Series Access Point may be powered with the local power supply included with the access
point or by using powering equipment capable of providing Cisco in-line power over Ethernet, such as Cisco Aironet
Power Injectors or Cisco in-line powered switches and routers. The powering equipment must be able to support the
power requirements of the access point, which depend on the product configuration as follows:
802.11a (single radio)
8 watts
802.11b (single radio)
6 watts
802.11g (single radio)
6 watts
802.11a/b/g (dual radio)
11 watts
The Cisco Aironet Power Injectors listed below provide sufficient power for each possible configuration of the access
point.
The power injectors are used in combination with the 110-220 VDC power supply that is shipped with the Cisco
Aironet 1200 Series access point platform and preconfigured bundles.
AIR-PWRINJ3
Cisco Aironet Power Injector for the 1100 and 1200 Series
access points
RJ-45 Ethernet LAN connection
AIR-PWRINJ-FIB
Cisco Aironet Power Injector Media Converter
MT-RJ (multimode fiber) LAN connection
Console Cable
This optional cable may be used in the initial installation and set-up of the access point.
AIR-CONCAB1200
Auxiliary/Console port cable
