3-5
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
OL-32138-01
Chapter 3 Troubleshooting
Verifying Controller Association
Verifying Controller Association
To verify that your access point is associated to the controller, follow these steps:
Step 1
Log into your controller web interface using a web browser.
You can also use the controller CLI
show ap summary
command from the controller console port.
Step 2
Click
Wireless,
and verify that your access point MAC address is listed under Ethernet MAC.
Step 3
Log out of the controller, and close your web browser.
Association
status
Chirping (short blips)
Green
This status indicates a normal operating condition. The
unit is joined to a controller, but no wireless client is
associated with it.
Solid
Green
Normal operating condition with at least one wireless
client associated with the unit
Operating
Status
Blinking
Amber
A software upgrade is in progress
Cycling through
Green
,
Red
and
Amber
Discovery/join process is in progress
Rapidly cycling through
Red
,
Green
,
Amber
and
Off
This status indicates that the Access Point location
command has been invoked.
Blinking
Red
This status indicates that an Ethernet link is not
operational
Alignment
Mode
Color
Signal Level (dBm)
Solid
Green
> –44
Fast blinking
Green
–47 to –44
Medium blinking
Green
–50 to –47
Solid
Amber
–53 to –50
Fast blinking
Amber
–57 to –53
Medium blinking
Amber
–60 to –57
Slow blinking
Amber
–63 to –60
Slow blinking
Red
–66 to –63
Medium blinking
Red
–69 to –66
Fast blinking
Red
–72 to –69
Solid
Red
–75 to –72
Off
< –75
LED Message
Type
Color
Meaning
