Cisco AIR-AP1251AG-A-k9, Руководство по установке оборудования

Страница: 58 / 140

C I S C O C O N F I D E N T I A L - D r a f t A 1
2-28
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-02
Chapter 2 Installing the Access Point
Inserting a Radio Module
Inserting a Radio Module
Note
To install or remove a radio module, the access point must be removed from the mounting plate.
Follow these steps to insert a radio module:
Step 1
Carefully insert the access point module rails into the radio module slots (see Figure 2-18 ).
Figure 2-18 Inserting the Radio Module
Step 2
Slowly slide the radio module into the access point until you feel resistance.
Step 3 Ensure the module latch is in the fully open position (see Figure 2-19 ).
Note If the module latch is not in the open position, the latch will not allow the module to be closed.
1
Radio module slot on access point
3
Access point module rail
2
Radio module
4
Radio module slot
170300
4
3
2 1