8
Cisco Aironet Dual Band MIMO Low Profile Ceiling Mount Antenna (AIR-ANT2451NV-R)
78-19022-02
Installation Notes
Figure 2
Ceiling Tile Finished Installation
Step 8
Reinstall the ceiling tile.
Step 9
Connect the antenna cables to the access point.
Note
The 5-GHz antenna cables are identified by a blue collar near the connectors. Make sure that you
connect these cables to the 5-GHz antenna connection on the access point.
Suggested Cable
Cisco recommends a high-quality, low-loss cable for use with the antenna.
Note
Coaxial cable loses efficiency as the frequency increases, resulting in signal loss. The cable should be
kept as short as possible because cable length also determines the amount of signal loss (the longer the
run, the greater the loss).
276472
