12
Quick Start Guide for Cisco 910 Industrial Routers
Installation of the Device
Indoor Antenna Installation
Follow these steps to install the 3G antenna for IR910G-K9/IR910G-NA-K9, or Wi-Fi antenna for IR910W-K9, for indoor
use:
1.
Use two M3 screws to fix the antenna on the chassis, as shown in
Figure 7
Fixing the Antenna
2.
Attach one end of the cable to the antenna, and the other end to the antenna connector on the panel.
Note:
The 3G antenna has a TNC type connector with a black heat shrink tube. The 868MHz LoRa card antenna has
an SMA type connector with a black heat shrink tube. The 433MHz LoRa card antenna has an SMA type connector
with a white heat shrink tube.
1
Fix the antenna with two M3 screws
4
M3 screws
2
Wi-Fi antenna
5
Sensor card antenna
3
Chassis
6
3G antenna
