1-42
Cisco SRST SNMP MIB Release 3.4 Guide
OL-7959-01
Chapter 1 Cisco SRST SNMP MIB Support
CISCO-SRST-MIB Object Groups
csrstSipEndpointIpAddress
read-only
This object indicates the SIP endpoint IP address
configured on this router. The type of IP address used
here is indicated by the csrstSipEndpointIpAddrType
object.
csrstSipEndpointDN
read-only
This object indicates the SIP phone's DN or line
number assigned to the SIP endpoint.
csrstActiveStatsGroup
csrstSipVoRegNumberListTa
g
read-only
This object indicates the particular index of the
number list configured for the corresponding voice
register pool.
csrstState
read-only
This object indicates the current state of Cisco SRST
feature on this router.
Active - At least one IP or SIP phone is registered
Inactive - Cisco SRST has no IP or SIP phones
registered
csrstSipPhoneCurrentRegiste
red
read-only
Total number of SIP phones currently registered to the
SRST router.
csrstSipCallLegs
read-only
Total number of SIP call legs routed through the SRST
router since going active. This includes incoming and
outgoing calls.
csrstTotalUpTime
read-only
Accumulated total number of minutes that router is
active in SRST mode.
csrstMIBNotifsGroup
csrstStateChange
notificatio
n
An SRST up or down state change notification is
generated. This indicates one or more phones is
registered to the SRST router or none is registered.
csrstSysNotifSeverity
csrstState
csrstSysNotifReason
csrstFailNotif
notificatio
n
A failure notification is generated when the SRST
router encounters a catastrophic failure.
Table 1-6
SRST MIB Object Groups and Descriptions (continued)
MIB Group
MIB Object
Max
Access
Description