Chapter 1 Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
Before Installation
1-6
Cisco 850 Series and Cisco 870 Series Access Routers Cabling and Setup Quick Start Guide
78-16262-04
Nonwireless Routers
Portions of this guide do not apply to nonwireless models of the Cisco 850 series
and Cisco 870 series routers. Some illustrations show the router with antennas
attached, whereas the nonwireless routers do not have antennas or antenna
connectors on the back panel. However, except for the
“Connect the Antenna to
the Wireless Router (Optional)”
section, the connection procedures are the same
for wireless and nonwireless router models.
Read the Safety Warnings and Guidelines
Before you begin to connect your router, read the
Regulatory Compliance and
Safety Information for Cisco 800 Series Routers
document that is shipped with the
router. This document provides important safety warnings and guidelines.
Remove the Caution Sticker
Locate the yellow caution label that covers the LAN ports. Simply peel off the
label and the LAN ports are ready for use. Be sure that you do not connect ISDN
telephone lines to these LAN ports.
