Cisco 850 Series, Руководство по настройке, Страница: 94 / 196

8-4
Cisco 850 Series and Cisco 870 Series Access Routers Software Configuration Guide
OL-5332-01
Chapter 8 Configuring a Simple Firewall
Apply Access Lists and Inspection Rules to Interfaces
Apply Access Lists and Inspection Rules to Interfaces
Perform these steps to apply the ACLs and inspection rules to the network interfaces, beginning in global
configuration mode:
Command Purpose
Step 1 interface type number
Example:
Router(config)# interface vlan 1
Router(config-if)#
Enters interface configuration mode for the
inside network interface on your router.
Step 2 ip inspect inspection-name { in | out }
Example:
Router(config-if)# ip inspect firewall in
Router(config-if)#
Assigns the set of firewall inspection rules to the
inside interface on the router.
Step 3
exit
Example:
Router(config-if)# exit
Router(config)#
Returns to global configuration mode.
Step 4 interface type number
Example:
Router(config)# interface fastethernet 4
Router(config-if)#
Enters interface configuration mode for the
outside network interface on your router.
Step 5 ip access-group { access-list-number |
access-list-name }{ in | out }
Example:
Router(config-if)# ip access-group 103 in
Router(config-if)#
Assigns the defined ACLs to the outside
interface on the router.
Step 6
exit
Example:
Router(config-if)# exit
Router(config)#
Returns to global configuration mode.