Chapter 2 Installation
Installing the Router
2-10
Cisco 837 Router and SOHO 97 Router Hardware Installation Guide
78-14781-02
Perform the following steps to mount the router on the wall:
Step 1
Secure two screws 7
5/8 inches (19.35 cm) apart into a wall and 1/8 inch (0.32 cm)
from the wall.
Step 2
Hang the router on the screws as shown in Figure 2-3.
Step 3
Place the power supply on a horizontal surface.
Installing the Router
To install the router, you need to perform the following tasks in the following
order:
1.
Connect the Ethernet devices to the router.
2.
Connect the ADSL line.
3.
Connect a terminal or PC to the router for software configuration using the
command-line interface (CLI) or for troubleshooting.
4.
Connect the router to the power source.
5.
Verify the links, using the router LEDs.
1
Two number-six, 3/4-in.
screws
5
Maximum distance between the
router and the power supply
(6 ft [1.8 m])
2
Distance between the two
screws (7 5/8 in. [19.35 cm])
6
Horizontal surface for placing
the power supply.
3
Cisco 837 router
7
Distance between the screw and
the wall (1/8 in. [0.32
cm]).
4
Mounting brackets
