8
Installing and Configuring Cisco 802 IDSL and Cisco 804 IDSL Routers
78-10368-03
Connecting Cables to the Router
Connecting a Server, PC, or Workstation
Connect the yellow cable to one of the following ports:
•
The yellow Ethernet port on your Cisco 802 IDSL router.
•
Any of the yellow Ethernet ports on your Cisco 804 IDSL router.
Step 1
Connect the other end of the cable to the server, PC, or workstation.
Step 2
Check the LED corresponding to the connected port after router power-up:
•
The LINK LED is on the Cisco 802 IDSL back panel.
•
ETHERNET 1, 2, 3, and 4 LEDs are on the Cisco 804 IDSL front panel.
Step 3
If the LINK or ETHERNET 1 LED is not on, try pressing the TO HUB/TO PC button.
Step 4
If the ETHERNET 2, 3, or 4 LED is not on, see the
Cisco 800 Series Routers Hardware Installation
Guide
.
PC
SER 0
OK
LAN
AUX
AUX
Cisco 804 IDSL Router
TO HUB
TO PC
Cisco 804 IDSL
4
3
2
1
ETHERNET 10
BASE T
CONSOLE
IDSL
+5, -24, -71 VDC
