Cisco 7970 Series Скачать руководство пользователя страница 30

Страница: 30 / 98

OL-15895-01

Using Hold and Resume

You can hold and resume calls. When you put a call on hold, the Hold icon

appears next to the

caller ID and the corresponding line button flashes green

If the Hold Reversion feature is enabled for your phone, a call that you put on hold reverts back to
ringing after a certain period of time. The “reverting” call remains on hold until you resume it or until
Hold Reversion times out.

Your phone indicates the presence of a reverting call by:

•

Alerting you at intervals with a single ring (or flash or beep, depending on your phone line setting).

•

Briefly displaying a “Hold Reversion” message in the status bar at the bottom of the phone screen.

•

Displaying the animated Hold Reversion icon

next to the caller ID for the held call.

•

Displaying a flashing amber line button

(depending on the line state).

Tips

•

Engaging the Hold feature typically generates music or a beeping tone.

Hang up while using the speakerphone Press

EndCall

Hang up one call, but preserve another
call on the same line

Press

EndCall

. If necessary, remove the call from hold first.

If you want to...

Then...

Put a call on hold

Make sure the appropriate call is highlighted.

Press

Hold

Remove a call from
hold on the current line

Make sure the appropriate call is highlighted.

Press

Resume

Remove a call from
hold on a different line

Press the appropriate line button:

(flashing). Doing so might

cause a held call to resume automatically:

•

If there is a reverting call on the line, that call will resume.

•

If there is more than one reverting call on the line, the oldest
reverting call will resume.

•

If a non-reverting held call is the only call on the line, it will
resume.

If necessary, scroll to the appropriate call and press

Resume

If you want to...

Then...

Содержание 7970 Series



































































































Результаты поиска

Содержание 7970 Series

Отзывы:

Cisco 7970 Series, Руководство по эксплуатации телефона, Страница: 30 / 98

Результаты поиска

Содержание 7970 Series

Отзывы: