Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Adding Phones to the Cisco Unified CallManager Database
2-12
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SCCP), Cisco Unified IP Phones
OL-8151-01
Related Topics
•
Adding Phones with Auto-Registration, page 2-10
•
Adding Phones with Cisco Unified CallManager Administration, page 2-12
•
Adding Phones with BAT, page 2-12
Adding Phones with Cisco Unified CallManager Administration
You can add phones individually to the Cisco Unified CallManager database
using Cisco Unified CallManager Administration. To do so, you first need to
obtain the MAC address for each phone. See the
of a Cisco Unified IP Phone” section on page 2-9
for instructions.
After you have collected MAC addresses, in Cisco Unified CallManager
Administration, choose
Device > Phone
and click
Add New
to begin.
For additional instructions and conceptual information about
Cisco Unified CallManager, refer to
Cisco Unified CallManager Administration
Guide
and to
Cisco Unified CallManager System Guide
.
Related Topics
•
Determining the MAC Address of a Cisco Unified IP Phone, page 2-9
•
Adding Phones with Auto-Registration, page 2-10
•
Adding Phones with Auto-Registration and TAPS, page 2-11
•
Adding Phones with BAT, page 2-12
Adding Phones with BAT
The Cisco Bulk Administration Tool (BAT) is a plug-in application for
Cisco Unified CallManager that enables you to perform batch operations,
including registration, on multiple phones.
To add phones using BAT only (not in conjunction with TAPS), you first need to
obtain the appropriate MAC address for each phone. See the
MAC Address of a Cisco Unified IP Phone” section on page 2-9
for instructions.
Содержание 7902G - Unified IP Phone VoIP
Страница 4: ......
