manualshive.com logo in svg

Cisco 7832, Руководство по установке

Поделиться
Скачать
Cisco 7832 Скачать руководство пользователя страница 34

Installation Guide for Cisco IP Phone with Multiplatform Firmware

30

Physical and Operating Environment Specifications

Technical Details

Physical and Operating Environment Specifications

The following table shows the physical and operating environment specifications for the Cisco IP Phone with 

Multiplatform Firmware.

Table 1: 

Physical and Operating Specifications

Specification

Value and Range

Operating temperature

32° to 104°F (0° to 40°C)

Operating relative humidity

Operating: 10% to 90% (non-condensing)
Non-operating: 10% to 95% (non-condensing)

Storage temperature

14° to 140°F (–10° to 60°C)

Dimensions 

(Height * Width * Depth, 

exclusive of the foot stand)

6821: 8.14 in. (207mm) * 6.73 in. (171 mm) * 1.48 in. (37.5 mm)
6841:  8.14 in. (207mm) * 8.11 in. (206 mm) * 1.30 in. (33 mm)
6851:  8.14 in. (207mm) * 8.11 in. (206 mm) * 1.30 in. (33 mm)
6861:  8.14 in. (207mm) * 8.11 in. (206 mm) * 1.30 in. (33 mm)
6871:  8.14 in. (207mm) * 8.11 in. (206 mm) * 1.30 in. (33 mm)
7811: 8.14 in. (207 mm) * 7.67 in. (195 mm) * 1.1 in. (28 mm)
7821: 8.14 in. (207 mm) * 8.11 in. (206 mm) * 1.1 in. (28 mm)
7832: 8.9 in. (226 mm) * 8.9 in. (226 mm) * 2.14 in. (54.4 mm)
7841: 8.14 in. (207 mm) * 8.11 in. (206 mm) * 1.1 in. (28 mm)
7861: 8.14 in. (207 mm) * 10.42 in. (265 mm) * 1.1 in. (28 mm)
8800 series: 9.02 in. (229.1 mm) * 10.13 in. (257.34 mm) * 1.57 in. (40 mm)
8832: 10.9 in. (278 mm) * 10.9 in. (278 mm) * 2.4 in. (61.3 mm)

Weight
(exclusive of the foot stand 

and the handset)

6821: 1.005 lb. (456 g)
6841: 1.356 lb. (615 g)
6851: 1.365 lb. (602.8 g)
6861: 1.329 lb. (602.8 g)
6871: 1.319 lb. (598 g)
7811: 1.85 lb. (840 g)
7821: 1.91 lb. (867 g)
7832: 2.0 lb. (907 kg)
7841: 1.91 lb. (868 g)
7861: 2.32 lb. (1053 g)
8800 series: 2.62 lb. (1190 g)
8832: 4.07 lb. (1852 g)

Содержание 7832








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды