6-6
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
OL-5052-08
Chapter 6 Installing and Removing a Shared Port Adapter
SPA Blank Filler Plates
Using show Commands to Display SPA Information
describes the
show
commands you can use to display SPA information.
SPA Blank Filler Plates
SPA blank filler plates are available to fill an unused SPA subslot.
When a SPA subslot is not in use, a SPA blank filler plate must be installed in the empty subslot to allow
the router or switch to conform to electromagnetic interference (EMI) emissions requirements and to
allow proper airflow across the SPAs. If you plan to install a new SPA in a subslot that is not in use, you
must first remove the SPA blank filler plate.
Table 6-1
show Commands to Display SPA Information
Command
Type of Information Provided
show running-config
The router’s running configuration and interfaces available in
the system.
show hw-module subslot all oir
The operational status of all SPAs in the system.
show diag
SPA type in that slot, number of ports, hardware revision,
part number, and EEPROM contents.
show hw-module subslot all fpd
FPD version information of SPAs in the system.
show version
Cisco IOS software version, names and sources of
configuration files, and boot images.
